Aerotec Pte. Ltd.  Tel: +65 6749 4749  Fax: +65 6749 5567  E-mail: sales@aerotec.com.sg  Emergency: +65 9169 9990
  BRIFE OF OUR PRODUCTS
--

Compressor
-----------------------------------------
--
Heater
-----------------------------------------
--
Marine Air Conditioner
-----------------------------------------
--
Ducting & Accessories
-----------------------------------------
--
--
Grille, Diffuser, Louver
-----------------------------------------
--
Outfitting
-----------------------------------------
--
Diffuser box
-----------------------------------------

--

Marine Fan
-----------------------------------------
--
--
Mist eliminator
-----------------------------------------
--
Deck machinery
-----------------------------------------
--
Coating & sandblasting
machniery

-----------------------------------------
--
Duct forming machniery
-----------------------------------------
--
Sewage treatment and bilge
device

-----------------------------------------
--
 Switchboard
-----------------------------------------
--
 Busbar
-----------------------------------------
--
 Cable Support System
-----------------------------------------
--
 Shipboard and Offshore Cables
-----------------------------------------
--
 Transformer
-----------------------------------------
--
 NOZZLES
-----------------------------------------

     
 
     
 

Axial Flow
Available in both direct and belt driven arrangements. Casing can be constructed of mild steel, aluminum or stainless steel materials.


Impeller
Impellers used on axial fans features the following advantages:
Adjustalbe pitch angles from 4 to 40
High efficiencies - up to 86%
Non - overloading characteristic
Low noise level
Non-corrosive


Marine Fans
Fans for marine industries and offshore projects are fuggedly constructed to withstand stringent and hostile environments.
Explosion proof motors and spark Resistant Construction Fans are available on requirement.


Bifurcated Fans
Bifurcated Fans, splitway with motor out of air steam are disigned to meet diffcult operating conditions, like movement of
Heated and hot air /gas
Hazardous air
Kitchen exhaust system
Corrosive or contaminated properties
Alternate to flame proof motors


Plate Mounted Fans
Plate mount fan, an efficient alternative to te ducted axial fan where installation is a constrain and pressure requirement is low. Availale in 3phase or 1phase motors.

MANCOOLERS
Specially designed for cooling hot spots, cooling, gas freeing and fume removal applications. Mancoolers aid in the dissipation of body heat through a higher evaporation rate, helping to prevent heat exhaustion and increase personal safety. Particularly effective for fast turn around, minimising costly down time or where a clean healthy environment must be maintained for the safety of workers.

Belt Driven
Designed for application where motors need to be outside system airstream. belt driven fans are ideal for mositure laden or dust laden or where system exhausts heated air.


轴流式通风机
可用于直接传动或皮带传动布置。壳体可采用低碳钢、铝或不锈钢材料制作。

叶片
用于轴流式通风机的叶轮具有以下优点:
叶轮螺旋角可调,调整范围为4度到40度
效率高达86%
无过载
低噪声
无腐蚀

船用通风机
用于船舶工业及海上项目的通风机的构造极为坚固,可承受苛刻及不利环境影响。
可根据用户要求提供防爆电机及抗火花通风机。

分叉式通风机
分叉式通风机,将电机置于空气气流之外,可在苛刻工作条件下使用,例如:
加热及热空气/气体
有害气体
厨房排气系统
腐蚀性或污染物质
可采用防火电机

面板式安装通风机
在带导流罩的轴流式通风机的安装受到限制并且压力要求较低的情况下,面板式安装通风机是其一个有效代用品。可以采用三
相或单相电机。

MANCOOLERS
特殊设计用于热地点冷却、冷却、排气以及排烟应用。 MANCOOLER具有较高的蒸发率,有助于身体散热,可防止工作人员中暑
并增强工
作人员的安全性。特别适用于快速转向,可减小昂贵的 停机时间,或为了保障工作人员的安全,必须保持环境清洁及卫生的情况下。

皮带传动
设计用于需要将电机置于系统气流之外的情况下的应用。HISON皮带传动式通风机是潮湿、或多尘、或系统需要排出热空气的
情况下
的理想用品。

 


Aerotec Pte. Ltd. Address: No. 10 Ubi Crescent #04-98 UBI TECHPARK Lobby E, Singapore 408564 Tel: +65 6749 4749 Fax: +65 6749 5567
亚拓(私人)有限公司 乌美湾10号 乌美科技园 #04-98,新加坡邮区408564 电话:+65 6749 4749 传真:+65 6749 5567
Copyright 2009 Aerotec Pte. Ltd. All Rights Reserved.